Valves are a component of many different types of piping and power transmission systems. Manufacturers produce them in diverse sizes and materials. They are also available in many different types. Depending upon the application, specifications, and environment, a company may order a ball, diaphragm, check, needle, plug, relief or safety valve. In some instances, a Texas company may request bleeding or vent valves.
Defining Terms
A vent is an opening in a system of pipes. When air or any other gas builds up within the pipes, a vent allows the liquids or gas within to escape. This is a necessary action. An air bubble or too much pressure can create problems within a piping system. The employment of vent or bleeding valves or releases the gas, therefore eliminating the problem.
Venting or bleeding valves are float-controlled valves available in two basic types. These are:
- Start-up: These are suitable for venting low-pressure industrial systems after they are started up or filled.
- Continuous vent valves: The purpose of this type of vent valve is to remove accumulated air during plant operation. They can perform this task at both very low and high pressures.
A combination of the two types of valves also exists. Yet, no matter what type of vent valve a Texas company decides to install, the location is precise. No matter the type of application, installers must always place a vent valve at the high points along a pipeline where the air is more likely to accumulate and never position them in flushing lines or on standpipes.
Vent Valves
In Texas, oil and gas companies utilize many different types of valves for their piping systems. One common kind in use for reducing the amount of air in the pipes to a less hazardous level is the bleeding or vent valve. Vent valves are available in a variety of material; however, in general, the metal must be corrosion resistant.
If you are looking to install Vent Valves, in Texas, consider this. Many oil and gas companies contact Bulldog Specialties. This company is a manufacturers’ representative and oilfield wholesale distributor for a full-line of power transmission products dedicated to providing their customers with quality products including v-belts, bushings, hoses and sheaves. To learn more about what services and products they offer, contact their knowledgeable customer service agents online
