There are many reasons why a spray on foam roofing in Oklahoma system is superior in providing benefits to building owners. The two principle reasons are leak free and high insulation values. The other benefits, not necessarily of any lesser importance are its high compressive strength, very lightweight, long lasting, durability and its ability to self flash.
With the high insulation value, coupled with the other properties, the payback period with energy savings alone are quick.
How Is Spray On Foam Roofing In Oklahoma Accomplished?
It is a two part liquid to start with, when applied using a dual plurality applicator. The two liquids meet, a chemical reaction takes place a foam results. The foam is about 30 times the volume of the original liquid and as it expands it finds and fills every nook and cranny, hardening into a closed cell roof, impervious to just about anything that comes along. Within seconds, the foam hardens into a watertight membrane that is stuck to the substrate like a stamp on an envelope.
The foam adds very little weight to the roof structure, less than eight ounces per square foot. The life expectancy is 30 to 35 years when maintained properly. The insulation properties will be noticed immediately in energy savings for either heat or cooling.
Once the spray on foam roofing in Oklahoma has been applied over a perfectly prepared surface, a layer of protective elastomeric coating or pea gravel is applied. This covering not only helps with durability, it insulates the foam from the effects of UV rays. The roof is capable of standing up to pedestrian traffic when services on the roof need attention. This composite roof will now show energy savings approaching 50%. The insulation is aided by the reflective properties of the protective coating. The light color of the roof can lower the surface temperature of the roof by an amazing 100 degrees F.
Who Is Best To Apply Spray On Foam Roofing In Oklahoma?
The application of spray on roofing has to be done by professionals. A close familiarity with all the building codes is a necessity as is the equipment and procedures. This is not a do-it-yourself project. The surface preparation is perhaps the most important aspect of the process. If the process is re-roofing, some or all of the original roof coating may have to be removed so as to provide the ideal clean surface which will allow the foam to bond to the surface. Once the surface has been prepared the two part liquid process can begin. The materials that join to form the Expanded Polystyrene Insulation (EPS) are isocyanate and polyol resin. The material is heated as it enters the mixing chamber and the result is a spray which can be applied at different thicknesses to accommodate the roof.
To have the process of spray on foam roofing applied to your roof you can contact Preferred Roofing in Oklahoma City. They have the skilled application technicians, the equipment and the skills to do the correct job, the first time.
 |
 |
