Doing Glass Repair In Downers Grove

by | Jan 11, 2016 | Glass & Window Repair

Top Stories



When someone has a glass pane crack, they will most likely want to have Glass Repair in Downers Grove done so they can once again utilize the window. If the glass pane is not that large, it might be able to be replaced. Here are some instructions to follow when replacing a small glass pane.

Gloves should be worn the entire time the replacement is done. A tarp should be placed on the floor or ground near the window to help collect shards. Place a piece of masking tape diagonally in each direction across the broken shards, forming a letter X. Tap on the pane with the end of a hammer. The tape will help contain the pieces. Use a pair of needle-nosed pliers to remove smaller slivers from the frame.

Going to a glass store that deals with glass repair will be needed. Bring along the proper measurements and order a new pane. The frame should be cleansed with a mild detergent to remove any debris before placing the new pane into place.

Have a friend stand on the other side of the window to help hold the pane in place. Glass putty should be used to adhere the pane into the frame. This is a pliable material that can be rolled out into cylindrical shapes. While the friend holds the pane in place, place the putty on the other side, horizontal to each edge of the glass, so it is centered over the glass and the frame. Push into place to trap the glass in place. The other side will need putty as well.

When the putty hardens, it will need to be trimmed to remove any excess. This can be done with a utility knife. At this time, the window frame can be repainted if it appears to be worn.

If the glass is not able to be replaced in this method, Glass Repair in Downers Grove may be the solution. Calling a company like Bolingbrook Glass can be useful in getting the help needed to make a successful repair to a cracked pane. Someone would come to evaluate the pane and make a decision whether a repair or replacement will be needed.